COMMERCIAL FREEZER - STAINLESS STEEL XTERIOR, SOLID SWING, White Interior

Refrigeration:

• Traditional non-removable, split forced-air refrigeration system employs R-404a refrigerant within a sealed capillary tube system.
• Condensing unit is bottom-mounted and can be accessed from the front for ease of maintenance.
• Priority, directed air flow provides optimum cooling and energy efficiency through front of unit for optimized heat exchange ventilation.
• Lint-Tolerant Design with wide spaced fins, maximizes airflow over the compressor and minimizes build-up of dust and lint.
• Corrosion resistant coated evaporator coil.
• Automatic, stainless steel condensate control system.
• Equipped with Energy Efficient Digital Controller featuring visual/audible product protection alarm.
• Freezers factory preset for -23.3°C (-10°F).
• Technologically advanced ProducTemp™ provides exterior product temperature display. Displays to a resolution within 1°.
• Energy-Saving, Time-Initiated, Temperature-Terminated Defrost System with Evaporator Fan Motor Delay during Defrost and Fan Motor Interrupt on Door Opening. Features Manual Defrost Override.
• Low Energy Cabinet Mullion Heater prevents frosting.
• Quality, self-lubricating and sealed motors with streamlined air-flow provide quieter yet robust refrigeration.
• Equipped with Digital Thermometer.

Cabinet:

• Exterior – stainless steel front and sides.
• Interior – NSF approved white aluminum liner with stainless steel coved corner floor.
• Ergonomic raised interior floor.
• Insulation – cabinet and solid doors are foamed-in-place with eco-conscious, polyurethane insulation.
• Heavy duty thread-in leveler legs.

Doors:

• Stainless steel front with white aluminum interior liner and large grip, recessed handle(s).
• Self-Closing Swing Doors feature hold-open position, spring-back protection and door locks.
• Magnetic gaskets are single piece bead-mount construction easily removable for cleaning.

Lighting:

• Auto-Actuated Interior Lighting.

Storage:

• Six (6) white coated shelves 21 1 /2"W x 20 1/2"D (547mm x 521mm), are NSF approved.
• Heavy duty aluminum shelving pilasters will not peel or chip adjustment of 1/2" (13mm) increments.

Electrical:

• Factory power cord installed for connection to a sole-use (dedicated) 115V/60Hz/1-Phase, 15 Amp circuit.