UP Series Balances
Shimadzu's UP Series balance offers significantly improved response, which provides the fastest response performance in its class.
View the balances
Significantly Improved Response Provides Fastest Response Performance in Its Class
Advanced digital control technology shortens display response times to about one ninth of previous values when weighing minute quantities, which significantly improves work efficiency.
UP-Wind Break (large pan windbreak) (only for large pan models with 0.01 g minimum display value)
Newly designed UP-Wind Break included standard. It successfully reduces effects from drafts, such as from air conditioners, which helps improve the efficiency of weighing operations.
The aluminum UniBloc integrated sensor mechanism is precisely machined from a single block of aluminum alloy.
Because it integrates all the components used in the previous sensor unit without the need for any fastening screws, it is fastened without deflecting the elastic fulcrum, resulting in an exceptionally impact-resistant sensor that is unlikely to ever fail.
One Million-Cycle Endurance Testing
Engineered with the impact-resistant UniBloc sensor, they pass endurance testing with one million cycles.*
* Endurance Testing
Method: A 1-kg weight is moved on and off the pan at 1.5-second cycles.
Pass/fail criterion: Satisfies Shimadzu standards for routine inspections after the on-off cycles.
Note: Japan's Measurement Act specifies endurance testing to 100,000 cycles. UP series balances are tested to over ten times that level.
Full Aluminum Die Cast Housing Provides Excellent Chemical Resistance
The housing of UP series models is made completely of die cast aluminum. That makes them highly resistant to chemicals and corrosion for many years of worry-free operation.
STABLO-AP Ionizer (Static Remover)
AP Series Analytical Balances Available with the Ionizer Installed Internally (optional, sold separately)
The STABLO-AP (optional) is Shimadzu's solution for static electricity. By maintaining a superior ion balance, the static remover is especially useful for weighing powder and film samples.
Static electricity can cause measurement values to fluctuate or drift, even for 1 mg or 10 mg-level quantities. In addition to solving fluctuation and drift problems, the STABLO-AP also can improve work efficiency by preventing powder from clinging to spatulas.
Balance Keys Weighing Data Collection Software (for Windows®）
Once Balance Keys Windows®-based software is installed, analytical balance data can be easily loaded into Excel® or other software. The software can be downloaded free from the analytical balance website. Configuring settings for connecting to the analytical balance is simple and the software will help save labor and reduce transcription and other errors. It is also easy to record changes over time by specifying the output interval setting on the analytical balance.
Using this software, users can load measurement data directly from the analytical balance into Excel® worksheets normally used by the customer.
Proven Track Record of Compatibility with PLC
The UP series has a significant track record from being used in combination with various brands of PLC. Consequently, it is perfect for automation or internet-of-things applications. It can also be used to configure very robust systems. Analytical balance connectivity has also been verified in partnership with the following PLC manufacturers.
| Manufacturer | PLC Model | Communication Unit | Communication Method/Remarks | Appearance |
|---|---|---|---|---|
| Mitsubishi Electric Corporation |
Q Series | QJ71C24-R2 | Non-procedure method |
|
| KEYENCE CORPORATION |
KV-8000 | KV-XL202 | Protocol Studio Non-procedure method |
|
| OMRON CORPORATION |
CJ2 Series | CJ1W-SCU42 | Protocol Macro Non-procedure method |
|
| IDEC CORPORATION |
FC6A Series | CPU internal or FC6A-PC1 communication cartridge |
Non-procedure method Created using special tool |
|
Specifications & Options
X Series with Internal Calibration Weights
| Series | X Series (Small Pan Model with 0.001 g Minimum Display Value) | ||||
|---|---|---|---|---|---|
| Model | UP223X | UP423X | UP623X | UP823X | UP1023X |
| Capacity | 220g | 420g | 620g | 820g | 1020g |
| Minimum Display | 0.001g | ||||
| External Calibration Weight Range for Span Calibration | 100 to 220g | 100 to 420g | 100 to 620g | 400 to 820g | 500 to 1020g |
| Repeatability (at Weighing Capacity) |
≦0.001g | ||||
| Linearity | ± 0.002g | ± 0.003g | |||
| Response Time *1 | Approx. 1 sec. | ||||
| Sensitivity Stability Against Temperature Range | ± 3 ppm/°C (10 to 30°C) | ||||
| Pan Size | Approx. 108 x 105 mm | ||||
| Weight | Approx. 3.4 kg | ||||
| Series | X Series (Large Pan Model with 0.01 g Minimum Display Value) | ||
|---|---|---|---|
| Model | UP2202X | UP4202X | UP6202X |
| Capacity | 2200g | 4200g | 6200g |
| Minimum Display | 0.01g | ||
| External Calibration Weight Range for Span Calibration | 1000 to 2200g | 1000 to 4200g | 1000 to 6200g |
| Repeatability (at Weighing Capacity) |
≦0.01g | ||
| Linearity | ± 0.02g | ||
| Response Time *1 | Approx. 1 sec. | ||
| Sensitivity Stability Against Temperature Range | ± 3 ppm/°C (10 to 30°C) | ||
| Pan Size | Approx. 170 x 180 mm | ||
| Weight | Approx. 4.6 kg | ||
| Series | X Series (Small Pan Model with 0.01 g Minimum Display Value) | X Series (Large Pan Model with 0.1 g Minimum Display Value) | |||
|---|---|---|---|---|---|
| Model | UP422X | UP822X | UP4201X | UP8201X | |
| Capacity | 420g | 820g | 4200g | 8200g | |
| Minimum Display | 0.01g | 0.1g | |||
| External Calibration Weight Range for Span Calibration | 100 to 420g | 100 to 820g | 1000 to 4200g | 1000 to 8200g | |
| Repeatability (at Weighing Capacity) |
≦0.008g | ≦0.08g | |||
| Linearity | ± 0.01g | ± 0.1g | |||
| Response Time *1 | Approx. 0.6 to 1.0 sec | ||||
| Sensitivity Stability Against Temperature Range | ± 5 ppm/°C (10 to 30°C) | ||||
| Pan Size | Approx. 108 x 105 mm | Approx. 170 x 180 mm | |||
| Weight | Approx. 3.4 kg | Approx. 4.6 kg | |||
*1 Indicated response time values are typical.
Y Series without Internal Calibration Weights
| Series | Y Series (Small Pan Model with 0.001 g Minimum Display Value) | ||||
|---|---|---|---|---|---|
| Model | UP223Y | UP423Y | UP623Y | UP823Y | UP1023Y |
| Capacity | 220g | 420g | 620g | 820g | 1020g |
| Minimum Display | 0.001g | ||||
| External Calibration Weight Range for Span Calibration | 100 to 220g | 100 to 420g | 100 to 620g | 400 to 820g | 500 to 1020g |
| Repeatability (at Weighing Capacity) |
≦0.001g | ||||
| Linearity | ± 0.002g | ± 0.003g | |||
| Response Time *1 | Approx. 1 sec. | ||||
| Sensitivity Stability Against Temperature Range | ± 3 ppm/°C (10 to 30°C) | ||||
| Pan Size | Approx. 108 x 105 mm | ||||
| Weight | Approx. 2.7 kg | ||||
| Series | Y Series (Large Pan Model with 0.01 g Minimum Display Value) | ||
|---|---|---|---|
| Model | UP2202Y | UP4202Y | UP6202Y |
| Capacity | 2200g | 4200g | 6200g |
| Minimum Display | 0.01g | ||
| External Calibration Weight Range for Span Calibration | 1000 to 2200g | 1000 to 4200g | 1000 to 6200g |
| Repeatability (at Weighing Capacity) |
≦0.01g | ||
| Linearity | ± 0.02g | ||
| Response Time *1 | Approx. 1 sec. | ||
| Sensitivity Stability Against Temperature Range | ± 3 ppm/°C (10 to 30°C) | ||
| Pan Size | Approx. 170 x 180 mm | ||
| Weight | Approx. 2.9 kg | ||
| Series | X Series (Small Pan Model with 0.01 g Minimum Display Value) | X Series (Large Pan Model with 0.1 g Minimum Display Value) | |||
|---|---|---|---|---|---|
| Model | UP422Y | UP822Y | UP4201Y | UP8201Y | |
| Capacity | 420g | 820g | 4200g | 8200g | |
| Minimum Display | 0.01g | 0.1g | |||
| External Calibration Weight Range for Span Calibration | 100 to 420g | 100 to 820g | 1000 to 4200g | 1000 to 8200g | |
| Repeatability (at Weighing Capacity) |
≦0.008g | ≦0.08g | |||
| Linearity | ± 0.01g | ± 0.1g | |||
| Response Time *1 | Approx. 0.6 to 1.0 sec | ||||
| Sensitivity Stability Against Temperature Range | ± 5 ppm/°C (10 to 30°C) | ||||
| Pan Size | Approx. 108 x 105 mm | Approx. 170 x 180 mm | |||
| Weight | Approx. 2.7 kg | Approx. 2.9 kg | |||
*1 Indicated response time values are typical.
Options and Peripheral Equipment
| Description |
|---|
| Ionizer for Electronic Balance (Static Remover) STABLO-AP |
| Printer EP-100 |
| Printer EP-110 |
| RS-232C Cable 25P-9P (1.5 m) |
| USB-Serial Replacement Kit |
| Application Keyboard AKB-301 |
| Windbreak Set *1 |
| Windbreak Set (for large pan) *2 |
| Glass Windbreak WBC-102 |
| Large Size Windbreak WBC-502 |
| In-Use Protective Cover (3 pcs) (For Large-Pan Models with 0.01 g Min. Display Value) |
| In-Use Protective Cover (5 pcs) (For Large-Pan Models with 0.1 g Min. Display Value) |
| In-Use Protective Cover (5 pcs) (For Small-Pan Model) |
| In-Use Protective Cover (5 pcs) (For Display and Key Part) |
| Animal Bucket Set (for Large Pan Models with 0.01 g Minimum Display Value) |
| Animal Bucket Set (for Large Pan Models with 0.1 g Minimum Display Value) |
| Specific Gravity Measurement Kit SMK-101A (For Large Pan Model) (Up to approximately 2kg for weighing capacity) |
| Specific Gravity Measurement Kit SMK-102 (For Small Pan Model) |
| Remote Display RDB-201 |
| Remote Display RDB-202 |
| Relay Output Interface IFB-RY1 |
| RY1 Connection Cable |
| AC Adapter *3 |
*1 Included standard with small pan models with 0.001 g minimum display value.
*2 Included standard with large pan models with 0.01 g minimum display value.
*3 Included standard with main unit.
