17 Cu. Ft. Flammable Material Freezer with microprocessor temperature controller, Temperature display & Alarm module with battery back-up, audible and visual high/low temperature alarms, °C/°F convertible temperature display, and remote alarm contacts. Tw

The Largest 100% Canadian Owned and Operated Lab Equipment Distributor and Service Provider.

Free Technical Support
In-depth and personal over-the-phone support at no cost.

Quality Parts & Accessories
Mandel uses manufacturer-specified parts for all repairs and maintenance.
Details
The Standard Flammable Storage Freezers NFPA and OSHA guidelines 45 and 70 for the refrigerated storage of flammable (volatile) materials in general laboratory work areas. There are no electrical components located in the interior of the unit and the compressor’s electrical components have been sealed in a vapour-proof enclosure for additional safety. These units are NOT designed for use in environments where volatile/explosive conditions could potentially exist.
Freezer models feature a microprocessor temperature controller and display, allowing for precise temperature control, verification and recovery versus mechanical style thermostats.
Models utilize environmentally friendly, natural hydrocarbon (HC) refrigerants (not containing hydrofluorocarbons) vastly reduce global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines.
Please Note: For manual defrost freezers, periodic manual defrosting is required. Freestanding models require 4 inches of clearance around back and sides of unit for proper ventilation.
Features
- 17 CU. FT. CAPACITY
- ONE SOLID SWING DOOR, RIGHT HINGED
- SIX FIXED SHELVES
- KEYED DOOR LOCK
- MAGNETIC DOOR GASKET FOR POSITIVE SEAL
- LEVELLING LEGS
- PROBE ACCESS PORT (3/8")
- POWDER COAT EXTERIOR
- HIGH DENSITY URETHANE FOAM CABINET AND DOOR INSULATION
- NATURAL, HYDROCARBON REFRIGERANT (R290)
- TWO YEAR PARTS AND LABOR WARRANTY
Specifications
- EXTERIOR DIMENSIONS:30 3/4" W X 28 5/8” D X 67 3/4"H
- NOTE: THIS UNIT MUST HAVE 4” CLEARANCE ON SIDES AND BACK FOR ADEQUATE VENTILATION
- MANUAL DEFROST
- 115V, 60 HZ, 6 AMPS, ½ HP
- ETL LISTED
- SHIPPING WEIGHT:220 LBS.